5 pneumatic orbital sander
5 Inch Pneumatic Grinder Random Orbital Pneumatic Sander Circular Air Polished Grinder Vacuum Eccentric Polishing Machine Tools
No-load Speed：10000 rpm
Working Pressure：6 - 8 kgf/cm⊃2;
Air Consumption：0.34 L / min
Features:
- Movement grinding speed, effectively shortening the operating time.
- small volume,high speed, low noise.
- Plastic Lightweight, high balance, the use of time does not produce fatigue ,high stability.
- Cylinder after heat treatment, durable.
- High-performance motor with high quality.
- Trigger pressure speed control gear free speed.
- Air consumption is small, suitable for long working hours.
- Use (applicable industry) Automotive, trains, ships, electric cars, furniture and so on.
For Polishing Wheel: 5 inches
Air Inlet: 1/4PT
Eccentricity: 5 (%)
Plate Diameter: 125mm (5inch)
Recommended Tracheal Diameter: 5 * 8mm
Application: Furniture, Car
1 x 5 Inch Polished Grinding Machine
1 x Small Inner Hex Wrench
1 x Instruction Manual
YOUSAILING 5 Inches Self-vacuum Pneumatic Sanders 125MM Sanding Machine Air Eccentric Orbit 4.8mm Car Polisher
Specifications
Model:980
Pad Size:5 inches(125mm)
Oribit Diameter: 5mm
Air Consumption:12CFM
Air Pressure:5.5-6.5 kg/cm 2
Free Speed:9000rpm
Warm tips:
*Add air lube oil to the air sander before&after using the cars polishers.
*Rotate the air car polishers with nothing a few seconds after adding air lube oil.
*Cheak before using.Add lube oil to lubricate and clean dust.
*If find any part broken or missing,do notuse it until it is fixed.
*Assembling sanding pad and sandpaper when switch is on isprohibited.
*Do notoverload the sander and rotate it without sanding pad at high speed and it will be durable.
5" Non-Dust-Absorbing Matte Surface Circular Pneumatic Sandpaper Random Orbital Air Sander Polished Grinding Machine Hand Tools
5inch Features:
- 5 inch small size, suitable for a variety of angles working.
- 10000RPM high speed, with good grinding efficiency.
- Low noise, powerful vacuum effect, use it for a long time without fatigue.
Pad Size: 5 Inch
Free Speed: 10000 RPM
Air Flow: 16 S CFM, 453 LPM
Air Pressure: 90PSI, 6.3 BAR
Air Inlet: 1/4'' NPT
Recommended Hose Size ID: 1/4in / 6.0mm
Precautions:
- This tool should only be used for the intended use it was designed for. If this tool produces an unusual sound or vibration stop and service by a competent repair person.
- Test and operate this tool at 90 PSI(6.2 BAR) maximum. Always use an airline filter / regulator / lubricator.
- Always wear goggles or face shield when operating this tool.
Application:
- For the surface grinding of iron, wood, plastic, tire.
- For fine polishing of ship, car, and the aviation industry.
- For removing the burr, rust and paint etc.
- Package includes: 1pcs
-Note: This product is non-dust-absorbing
We also have related products. Please contact me if you need.
About Shipment:
1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO)
2. Orders processed timely after the payment verification.
3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.
4. The images shown are not the actual item and are for your reference only.
5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
6. If you have not received your shipment within 30 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
7. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.
Return & Refund:
1. You have 7 days to contact us and 30 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and WE WILL NOT ISSUE YOU A REFUND OR REPLACEMENT. There are NO EXCEPTIONS! Shipping cost is bear by both seller and buyer in half.
2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your po#.
3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from aliexpress. OR, you may choose to have a replacement.
4. We will bear all the shipping cost if the product(s) is (are) not as advertised.
About Guarantee:
1. 12 months Manufacturer`s limited Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
2. Defective items MUST BE reported and returned within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your order number. WE DO NOT REPAIR OR REPLACE ITEMS WITH AN EXPIRED WARRANTY.
You agree to all of the above-listed policies upon ordering on aliexpress!
About Feedback:
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
It is impossible to address issues if we do not know about them!
New Air Sander Mini Pneumatic 2"/3" Grinding Machine Set for Car Polishing High Speed Buffer Dual Action Orbital Polisher+Sponge
Features:
The product is light in weight, easy to carry, easy to operate, and labor-saving while improving work efficiency.
The bearings we use in this product are of better quality and more durable than other sellers.
Pneumatic self-adhesive discs can be used to paste all kinds of polishing products you need.
We combinationed sandpaper and sponges of different hardness to make it easier to work.《 Orange sponge is the hardest, black is medium, and red is the softest》
Pneumatic sticking plate thread is M6, you can use 2inch or 3inch replacement products.
Eccentric machine, suitable for wood polishing, automotive beauty, metal surface processing, etc.
Suitable for iron, wood, plastic, metal, rubber, stone, marble and other materials grinding, fine polishing.
Widely used for construction, automobile,mold industry,woodworking and furniture manufacuring.
Specifications:
Suitable for 2" or 3" sanding pad
Color:As picture shown
Air Pressure:90PSI
Air inlet: 1/4"
Hose Size:3/8"
Orbit Diameter: 3mm/1/8"Approx.
Free Speed: 13000RPM
Air Consumption: 4 CFM
Oil Daily.
If you have any problems,feel free to contact me.
When replacing the plate, please aim the metal screwdriver at the hole in the machine first and press hard to replace the plate.The rotation button at the bottom of the machine can adjust the rotation speed.
A Black set 94pcs :
Polishing machine Black+ 2/3 inch self-adhesive sponge disc 24pcs+ 2/3 inch Artificial wool mat 6pcs+sandpaper 60pcs(1inch 180# x30 / 2inch 320# x30)+ screwdriverx1pcs+2/3inch pad x 1pcs
A Red set 94pcs:
Polishing machine red+ 2/3 inch self-adhesive sponge disc 24pcs+ 2/3 inch Artificial wool mat 6pcs+sandpaper 60pcs(1inch 180# x30 / 2inch 320# x30)+ screwdriverx1pcs+2/3inch pad x 1pcs
B Black set 51pcs :
Polishing machine Black+ 2/3 inch self-adhesive sponge disc 18pcs+ sandpaper 30pcs(2inch 180# x15/ 3inch 320# x15)+ screwdriverx1pcs+2/3inch pad x 1pcs
B Red set 51pcs:
Polishing machine red+ 2/3 inch self-adhesive sponge disc 18pcs+ sandpaper 30pcs(2inch 180# x15/ 3inch 320# x15)+ screwdriverx1pcs+2/3inch pad x 1pcs
Sponge set 20pcs
Sponge set 30pcs
2 inch self-adhesive sponge disc 12pcs
3 inch self-adhesive sponge disc 12pcs
2inch Artificial wool mat 3pcs
3 inch Artificial wool mat 3pcs
《 Orange sponge is the hardest, black is medium, and red is the softest》Please choose the sponge according to your different polishing requirements.
Feedback：
Your feedback is very important to us.
Don't hesitate to email us if any questions, we will reply in 12 hours. Don't open dispute or leave negative feedback easily , trust us and email us directly , all the issues can be solved.
Please kindly give us a 5 STAR Postive feedbcak if you are satisfied with our item and service.
Return item must be in original condition, sent the item back to the address we tell you.
Purchase price will be refunded but shipping cost is not refundable if buyers buy products in mistake ,buyers need to afford the returning shipping cost .
Contact Us：
Please feel free to send message to us If there is any problem.
Don't hesitate at asking us for help if there is any we can do for you.
NOTE:
The Import Duties, Taxes and Charges of items which does Buyer bear are not included in the unit price and shipping cost.
Please check with the Customs of your country about the amount and details for these additional costs before you order.
FivePears Pneumatic Sanding Machine 125MM 5" Eccentric 5MM Random Orbital Vacuum Air Sander Pneumatic Tools
Shoppin Guide
Fast delivery
Shipping from local warehouse, it takes up to 2-7 working days, nearby cities. (Since every place has the capacity, it may take more time to reach remote areas.)
100% Original
This product is 100% Five pears original product. Please choose Five pears authorized store. Let us resist counterfeit and shoddy products.
Technical Support
Fivepears provide free lifetime technical support
FivePears Pneumatic Sanding
FivePears Pneumatic Sanding Machine 125MM 5" Eccentric 5MM Random Orbital Vacuum Air Sander Pneumatic Tools
Brand Name:FivePears
Air Inlet NPTF:1/4"
Eccentric Orbit:5mm
No-Load Speed:12000
Product Weight:1.23kg
Whether to Vacuum:yes
DiscDiameter:125mm (5")
Shell Material:Plastic Steel
Average airConsumption: 8CFM
Be Applicable:Polishing for Wood Car
Ergonomic Design
The ergonomic pressure plate switch makes the user more comfortable to use. Light weight and low vibration can reduce user fatigue and prolong user working time.
Precision Movement
The movement is equipped with a new type of plastic steel rotor and Japanese NSK bearings, effectively reducing weight and vibration. Work continuously for more than 8 hours.
Speed Switch
Free speed control switch, adjustable range: 0 rpm~12000 rpm. The required speed can be adjusted according to different working environments to improve work efficiency.
Polishing Pad
The bottom of the polishing pad is designed with Velcro to facilitate the replacement of consumables and improve work efficiency. High-quality leather makes it durable and at the same time highly elastic.
Vacuum Tube Interface
Threaded connection straw. The function of automatic vacuuming brings a better working environment.
1.Wood Grinding/Polishing
2.Metal Rust Removal/Polishing
3.Car Grinding/Polishing
4.Wall Polished
1.Remove the top sealing cap
2.Fix the hex nut with a wrench
3.One hand is fixed, the other hand is rotated clockwise to tighten
Daily Refueling Maintenance
Please add oil every day: inject 0.5CC special oil for pneumatic tools from the air inlet, and rotate it for 5 seconds without load to complete daily maintenance.
Clean Dust Daily
After using the machine every day, disassemble the polishing pad, use tools to remove dust, and complete daily cleaning tasks.
Alexpress
Normal situation: arrive at the destination within 16-35 working days.
China Post
Normal situation: arrive at the destination in about 16-35 working days
EUB
Normal situation: 7-10 working days to reach the destination, Russia 7-15 working days
Note
Except for special circumstances (including but not limited to: force majeure, customs inspection, policy adjustment and holidays, etc.).
FivePears Specializing in the design and production of pneumatic tools. Our philosophy is to design and create extraordinary quality tools, make Chinese manufacturing to the world, and let more people use high-quality and cheap tools.
Pneumatic Orbital Polishing/Grinding Machine 5" Sander Air Grinder Professional Polisher Tool for Wood Furniture Car Floor
YOUSAILING Air Orbital Sanders 5 Inch 4.8mm Eccentric Orbit Pneumatic Polishing Machine For Cars Woodworking
Model NO. :AT980
Warm tips:
*Add air lube oil to the air sander before&after using the cars polishers.
*Rotate the air car polishers with nothing a few seconds after adding air lube oil.
*Cheak before using.Add lube oil to lubricate and clean dust.
*If find any part broken or missing,do notuse it until it is fixed.
*Assembling sanding pad and sandpaper when switch is on isprohibited.
*Do notoverload the sander and rotate it without sanding pad at high speed and it will be durable.
5 Inch Non-vacuum Matte Surface Circular Pneumatic Sandpaper Random Orbital Air Sander Polished Grinding Machine Hand Tools
Features:
- Movement grinding speed, effectively shortening the operating time.
- small volume,high speed, low noise.
- Plastic Lightweight, high balance, the use of time does not produce fatigue ,high stability.
- Cylinder after heat treatment, durable.
- High-performance motor with high quality.
- Trigger pressure speed control gear free speed.
- Air consumption is small, suitable for long working hours.
- Use (applicable industry) Automotive, trains, ships, electric cars, furniture and so on.For Polishing Wheel: 5 inches
No-load Speed: 10000 (rpm)
Working Pressure: 6-8kgf/cm⊃2;
Air Inlet: 1/4PT
Eccentricity: 5 (%)
Plate Diameter: 125mm (5inch)
Recommended Tracheal Diameter: 5 * 8mm
Air Consumption: 0.34L / min
Application: Furniture, Car
1 x 5 Inch Polished Grinding Machine
1 x Small Inner Hex Wrench
1 x Instruction Manual
5 "100pcs 125mm 8holes flocking disc sandpaper set
Specifications:
Material: Aluminum Oxide
Diameter: approx. 125mm/ 5 inch
Color: As Picture Shows
Quantity: 100pcs--10pcs x 80/180/240/320/400/800/1000/1500/2000/3000 grits
Application:
Can be used in metal moulds, automotive paint, shipbuilding,woodworking furniture, wood, handicrafts and metal polishing,construction and other industries.
NOTE:The larger the sand paper particles (number), the finer the sandpaper, the smaller the sand paper particles (number) ,the rougher the sandpaper.
HIFESON 5 inch 6 inch Pneumatic Orbital Sander 125mm 150mm Air Sandpaper Machine Polisher Tool Professional Car Sanding Machine
HIFESON 5 inch 6 inch Pneumatic Orbital Sander 125mm 150mm Air Sandpaper Machine Polisher Tool Professional Car Sanding Machine
Product Details Introduction:
1. Instructions
2. Switch handle
3. Silencing device
4. Air Inlet
5. Speed switch
6. Chuck key
7. EU air intake male connector (GIFT)
8. Japanese air intake male connector
9. Magic paste chassis
*Not include the sponge or sandpaper in the package.
5" Non-Dust-Absorbing Matte Surface Circular Pneumatic Sandpaper Random Orbital Air Sander Polished Grinding Machine Hand Tools
5inch Features:
- 5 inch small size, suitable for a variety of angles working.
- 10000RPM high speed, with good grinding efficiency.
- Low noise, powerful vacuum effect, use it for a long time without fatigue.
Pad Size: 5 Inch
Free Speed: 10000 RPM
Air Flow: 16 S CFM, 453 LPM
Air Pressure: 90PSI, 6.3 BAR
Air Inlet: 1/4'' NPT
Recommended Hose Size ID: 1/4in / 6.0mm
Precautions:
- This tool should only be used for the intended use it was designed for. If this tool produces an unusual sound or vibration stop and service by a competent repair person.
- Test and operate this tool at 90 PSI(6.2 BAR) maximum. Always use an airline filter / regulator / lubricator.
- Always wear goggles or face shield when operating this tool.
Application:
- For the surface grinding of iron, wood, plastic, tire.
- For fine polishing of ship, car, and the aviation industry.
- For removing the burr, rust and paint etc.
- Package includes: 1pcs
-Note: This product is non-dust-absorbing
We also have related products. Please contact me if you need.
About Shipment:
1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO)
2. Orders processed timely after the payment verification.
3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.
4. The images shown are not the actual item and are for your reference only.
5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
6. If you have not received your shipment within 30 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
7. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.
Return & Refund:
1. You have 7 days to contact us and 30 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and WE WILL NOT ISSUE YOU A REFUND OR REPLACEMENT. There are NO EXCEPTIONS! Shipping cost is bear by both seller and buyer in half.
2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your po#.
3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from aliexpress. OR, you may choose to have a replacement.
4. We will bear all the shipping cost if the product(s) is (are) not as advertised.
About Guarantee:
1. 12 months Manufacturer`s limited Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
2. Defective items MUST BE reported and returned within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your order number. WE DO NOT REPAIR OR REPLACE ITEMS WITH AN EXPIRED WARRANTY.
You agree to all of the above-listed policies upon ordering on aliexpress!
About Feedback:
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
It is impossible to address issues if we do not know about them!
